RILECART F-500 Wire Binder & P-500 Wire Punch
Punching with the F-500 is very easy: the operator simply has to insert the book into the punching tool and press on the footswitch to punch.
Binding is an easy thing with the P-500: the operator only needs to insert manually the wire (and eventually the hanger) into the punched book, place it under the closing device and press the footswitch.
Punching with the F-500 is very easy: the operator simply has to insert the book into the punching tool and press on the footswitch to punch.
Binding is an easy thing with the P-500: the operator only needs to insert manually the wire (and eventually the hanger) into the punched book, place it under the closing device and press the footswitch.
Features:
PDF BROCHURE
- Electric Punching Machine F500:
- Maximum punching length: 530 mm.
- Maximum punching thickness per stroke: 2,5 mm.
- Punching distance from the edge is adjustable from 2 mm. up to 6 mm. depending on the tools used.
- Footswitch controlled.
- Accepts punching bars of 300 mm. and 230 mm. singly, doubly or in combination with 50 mm. thumb-cut punching bars, up to 530 mm. maximum length, in the same pitch.
- Maximum output: up to 1000 punching’s/hour, depending on materials used and skills of operator.
- Wide range of punching tools available, including tool for plastic-coils holes.
- Electric Closing Machine P500:
- Maximum closing length: 530 mm.
- Footswitch control.
- Adjustable for closing any diameter.
- Maximum output: up to 1000 bindings/hour, depending on materials used and skill of operator.
- Electric Punching Machine F500:
- 2Power Supply: 240/400 V 3-phase 50/60 Hz; 1,5 Kw
- Size: 110 x 710 x 1070 mm.
- Weight: 195 Kg
- Electric Closing Machine P500:
- Power Supply: 240/400V 3-phase 50/60 Hz; 1 Kw
- Size: 1100 x 710 x 1097 mm.
- Weight: 102 Kg
PDF BROCHURE
|
| ||||
RILECART F-800 Wire Binder & P-800 Wire Punch
With the widest punching length on the market, F-800 E.S. can satisfy even the most unusual requirements, allowing top performances in highly profitable markets. Due to the exceptionally strong punching power it is possible to punch thick cardboard, high blocks of sheets and even aluminum (with proper lubrication). Equipped with the punching tools Easy Setting and with the new “energy saving technology”.
Punching with the F-800 is very easy: the operator simply has to insert the book to be punched under the carter and press the footswitch to punch. All punch pins are disconnect able from the front without taking out the tools from the machine, simply unscrewing a screw.
Binding is an easy thing with the P-800: the operator only needs to insert manually the wire (and eventually the hanger) into the punched book, place it under the closing device and press the footswitch.
With the widest punching length on the market, F-800 E.S. can satisfy even the most unusual requirements, allowing top performances in highly profitable markets. Due to the exceptionally strong punching power it is possible to punch thick cardboard, high blocks of sheets and even aluminum (with proper lubrication). Equipped with the punching tools Easy Setting and with the new “energy saving technology”.
Punching with the F-800 is very easy: the operator simply has to insert the book to be punched under the carter and press the footswitch to punch. All punch pins are disconnect able from the front without taking out the tools from the machine, simply unscrewing a screw.
Binding is an easy thing with the P-800: the operator only needs to insert manually the wire (and eventually the hanger) into the punched book, place it under the closing device and press the footswitch.
Features:
PDF BROCHURE
- Maximum Punching and binding length: 800 mm.
- Maximum Punching thickness depending on the length of the item to punch: with 800 mm. length = 2,5 mm. with 600 mm. length = 4 mm. with 400 mm. length = 5 mm.
- Distance from the punching edge adjustable from 2 mm. up to 6 mm. (depending on tool being used).
- Footswitch controlled.
- Accepts punching bars of 300 mm. and 200 mm. singly, doubly or in combination with 200 mm. thumb-cut punching bars, up to 800 mm. maximum length, in the same pitch.
- Maximum output: up to 1000 punching/hour, depending on materials used and skills of operator.
- Wide range of punching tools available, including tool for plastic-coils holes.
- Tech Spec P800:
- Maximum closing length: 800 mm.
- Footswitch controlled.
- Adjustable for closing any diameter.
- Maximum output: 1000 pieces depending on materials used and skills of operator.
- Power: 400 V 3-phase 50/60 Hz
- Size: H 1100 x D 800 x L 1200 mm.
- Weight: 485 Kg
PDF BROCHURE
|
| ||||
Rilecart FAR 4/42 Auto Punch
This automatic punching machine from Rilecart has been designed specifically for small and medium sizes. Far 4/42 can be fed continuously with material of variable thickness (paper and/or light cardboard). Sheets are safely picked-up in bunches of 1,5/2 mm. each time, centered and punched with precision and accuracy. Sheets are then transported by a belt into the punching section.
This automatic punching machine from Rilecart has been designed specifically for small and medium sizes. Far 4/42 can be fed continuously with material of variable thickness (paper and/or light cardboard). Sheets are safely picked-up in bunches of 1,5/2 mm. each time, centered and punched with precision and accuracy. Sheets are then transported by a belt into the punching section.
Features:
PDF BROCHURE
- Maximum thickness per stroke: 2,5 mm. (standard 1,5 mm.) (Standard 1,5 mm.)
- Maximum punching size: 400 x 300 mm.
- Minimum punching size: 110 x 90 mm.
- Speed: up to 150 strokes per minute.
- Punching distance from the edge: from 2 mm. up to 6 mm. depending on punching tools used.
- Operates continuously using a pre-loading device.
- Shingle style delivery table with adjustable speed.
- Several punching tools for double loop binding or other mechanical binding systems
- Power Supply: 240 V single phase 50/60 Hz
- Power Drive: 3 Kw
- Size: L 3000 x D 700 x H 1200 mm.
PDF BROCHURE
| rilecart_far-4-42light_ing.pdf |
Rilecart F5/55 Auto Punch
Far 5/55 has been developed for fast punching of loose sheets in large quantities with any size and type of holes required for the different binding systems: wires, spiral, plastic combs. Changeover of the tools is very fast and safe. Far 5/55 can be fed continuously with material of variable thickness (paper and/or light cardboard). Sheets are safely picked-up by an opposite device in bunches of 1, 5/2 mm. each time, centered and then punched with precision and accuracy.
Features:
PDF BROCHURE
Far 5/55 has been developed for fast punching of loose sheets in large quantities with any size and type of holes required for the different binding systems: wires, spiral, plastic combs. Changeover of the tools is very fast and safe. Far 5/55 can be fed continuously with material of variable thickness (paper and/or light cardboard). Sheets are safely picked-up by an opposite device in bunches of 1, 5/2 mm. each time, centered and then punched with precision and accuracy.
Features:
- Maximum thickness per stroke: 2.5 mm. (standard 1.5 mm.).
- Maximum punching size: 550 x 550 mm.
- Minimum punching size: 160 mm. (on punching side) x 120 mm.
- Speed: adjustable up to 120 strokes/minute.
- Punching distance from the edge: adjustable up to 40 mm. max.
- Wide range of punching tools available, including tool for plastic-coils holes.
- Power Supply: 240 V single phase 50/60 Hz
- Power Drive: 3 Kw.
- Size: L 3200 x D 760 x H 1200 mm.
- Weight: 1250 Kg
PDF BROCHURE
| rilecart_far-5-55light_ing.pdf |